Home Theater, TV & Video

The Cambridge Audio AXR100 stereo receiver delivers 100 watts x 2 channels into 8-ohms, 20-20kHz with 0.15% THD. The built-in AM/FM tuner provides manual, seek & preset tuning. You can store up to 15 FM & AM presets each. You can select between Stereo or Mono when listening to FM; for low quality stereo FM signals, selecting mono can usually reduce the noise. There is 75-ohm FM connector & a 300-ohm two-wire AM connector on the receiver back-panel. FM wire antenna & AM loop antenna are included
The Cambridge Audio AXR100 features built-in Bluetooth 5.0 with support for wireless audio streaming (A2DP) & control (AVRCP). You’ll be able to wirelessly stream stored music, music apps, & other audio content on your Bluetooth-enabled source device to the AXR100 stereo receiver. You’ll also be able to control basic playback functions, such as Play/Pause and Previous/Next Track from the included remote. The receiver can pair with up to 8 devices, but only one can be used for playback at a time
The Cambridge Audio AXR100 has a built-in Phono preamplifier (Phono Stage) with a rear-panel phono input and ground terminal. The phono input supports turntables outfitted with Phono Cartridges of the Moving Magnet (MM) or high output Moving Coil (MC) type (between 2-6mV output and 30-50k load impedance). The Ground terminals on both the AXR100 stereo receiver and your turntable should be connected (where possible) with a ground wire for lowest noise/hum pickup.

1. Widely compatible with various playback devices, suitable for playback devices with audio input, driver free plug and play, strong compatibility, more stable connection without dropping wires
2. Super long battery life standby, continuous listening to music for up to 12 hours, international standard Type-C interface charging port, 500mAh large capacity lithium battery, no longer worried about battery life when used outdoors, and longer battery life
3. Built in NFC sensing pairing chip, driver free, easy pairing when close, compatible with various mobile phones, reducing the tedious manual connection to Bluetooth

Discrete high-current amplifiers on all channels deliver up to 75W per channel (at 8 ohms, 20-20 kHz,THD 0.08%)—enough power to drive most speakers in your smaller space
Elevate your music and movies with Dolby TrueHD, DTS-HD Master Audio decoders for lossless audio content, plus Dolby Pro Logic II and DTS Neo:6 upmixer to optimize legacy content.
8K video is supported on three of six HDMI inputs and one output. Enjoy easy video compatibility and great picture quality with HLG, HDR, Dolby Vision, HDR10+, and Dynamic HDR pass-through.